Need help?Do you have a question about the Victron energy Phoenix 24/375 and is the answer not in the manual?
General| Model | Phoenix 24/375 |
|---|---|
| Input Voltage | 24 V |
| Output Power | 375 VA |
| Continuous Output Power at 25°C | 300 W |
| Output Voltage | 230 VAC |
| Output Frequency | 50 Hz |
| Operating Temperature | -20 to +50 °C |
| Cooling | natural convection |
| DC connection | Screw terminals |
| Category | inverter |
| Protection | Output short circuit, Over temperature |
| Transfer time | 20 ms |
| DC Input Voltage Range | 19-33V DC |
Guidelines for optimal inverter placement and ventilation to ensure proper operation.
Details minimum battery capacity, fuse types, and DC cable cross-sections for optimal performance.
Specifies the required wire size for connecting the inverter chassis to ground for safety.
Warns against connecting the inverter output to other AC sources like wall outlets or generators.
Explains how to connect the inverter's neutral output to the chassis/ground as per local regulations.
Details how to connect a remote on/off switch, including specific automotive application wiring.
Outlines the process of configuring the inverter using a computer or smartphone via VE.Direct.
Defines the meaning of Green and Red LEDs and provides troubleshooting steps for common operational issues.
Explains the ECO mode function for power saving, including default settings and load dependency.
Details overload, low/high battery, temperature, and DC ripple protections with their restart behaviors.
Provides step-by-step instructions and diagrams for connecting the inverter's neutral to the chassis/ground.
Presents a table correlating battery connection conductor size to chassis grounding conductor size requirements.
To Next Page