Need help?Do you have a question about the Victron energy Phoenix Multi 12/2500/120 and is the answer not in the manual?
General| Input Voltage | 230 VAC |
|---|---|
| Output Power | 2500 VA |
| Output Frequency | 50/60 Hz |
| Battery Voltage | 12 VDC |
| Max Charge Current | 120 A |
| Peak Power | 5000 VA |
| Zero Load Power | 15 W |
| Protection | Overload, short circuit, over temperature |
| Input Frequency | 45-65Hz |
| Output Voltage | 230 V |
General safety guidelines and warnings for electrical shock, maintenance, and environmental conditions.
Safety precautions for installation, including grounding, fuses, and environmental checks.
Guidelines for safe transport and storage, including disconnection and temperature limits.
Overview of Multi and MultiPlus features like inverter, charger, auto-switch, PowerControl, and PowerAssist.
Details on adaptive 4-stage charging, absorption time, storage function, and dual battery charging.
List of article numbers for accessories like control panels, sensors, and cables.
Explanation of the on/off switch and 'charger only' mode for operation and battery saving.
Using the optional remote control panel for monitoring and setting maximum charge current.
Details on 'Raised Absorption' mode for traction batteries and 'Forced Absorption' mode.
Explanation of LED indicators for inverter status (on, overload, low battery) and charger status (bulk, absorption, float).
Interpreting LED combinations for critical temperature, low battery, overload, and ripple voltage conditions.
LED indications for bulk, absorption, float, and raised absorption charging phases.
Understanding indicators for limited input current and when the inverter supplements mains power.
To Next Page