Noise Reduction
by applying temporal and spatial noise reduction
filters to the video data. (Auto/Low/Medium/High/off).
Flesh Tone
Color Temprature
This function reduces the noise in MPEG files
MPEG Noise Reduction
setup
(Normal,warm,Cool)
Back Light(0-10)
Active color 3D
MADI Control
The backlight value can be varied (0-10). This function is used to
vary brightness level of the panel.
This feature improve the contrast level of the picture
PC Adjustment
This feature improve flesh tone (on/off)
Use this option to select and change colour temperature
Cross color
Reduction
Split Screen
This feature avoid the Jittering effect present in
Playing Video. (off/Adaptive/Manual).
This feature avoids the intermixing of two or more
color for enhancing color quality. (off/Adaptive/Manual).
This feature shows the difference in normal TV and
FAROUDJA Video optimized TV.
Active Contrast
This feature used to enhancement of Natural color.
(Low/Medium/High/off).
(Low/Medium/High/off).
(Low/Medium/High/off).
Phase
Manual Clock
H-Position
V-Position
Auto Adjust
Adjust the phase (0-100) and clock (0-100) to remove or
reduce picture noise.If noise appears adjust frequency by clock
for fine adjustments.
If Picture is not ok with auto setting then adjust Horrizontal
position (0-100) , Vertical Position (0-100) manually to
adjust the desired picture setting.
Auto setting allow the PC screen of Tv to self adjust.This
automatically sets the H-Position, V-Position, Phase and Clock.
14
Picture Mode
This function is used to select the presetted picture settings’
(Vivid,Hi-Bright,User,Cinema,Sports)
Contrast(0-100)
These settings are used to adjust the Brightness(0-100), Contrast(0-100)
Saturation(0-100),Sharpness(0-10) values for fine adjustments of the
Advance Picture
The Noise reduction (On / Off) reduce the noise
Video
Brightness(0-100)
Saturation(0-100)
Sharpness(0-10)
Hue(0-100)
Use this option for fine adjustments of picture.
7. Video Menu
NOTE: This is enabled for NTSC Channels only.
Clear All
Select this option to reset all picture settings to Default.
picture.
3D
(OPTIONAL)
3D Mode
This function is used to enable 3D mode ON/OFF/AUTO 2D->3D.
3D Video
Depth
This function is used to control depth of 3D
video.(This function is applicable for
2D to 3D conversion only).
3D Input
Format
Side By Side-When input 3D file(in multimedia/HDMI/
D2H source)is in side/side form then select
“Side By Side” format to view proper 3D picture.
Top Bottom-when input 3D file(in multimedia/HDMI/D2H
source) is in top/bottom form then select
“Top Bottom” format to view proper 3D picture.
Frame Packing-When input 3D file(in HDMI
source only) is frame packed i.e input
through Blue ray DVD players, then select
“Frame Packing” to view proper 3D picture.
This function is used while 3D video/imageis
playing to swap the left / right frames for
pleasant 3d viewing.
3D Swap
MCTi(Optional)
Use this function(Off/Low/medium/high) to control
motion and smoothness in picture.
AUTO 2D->3D can be used to convert normal 2D video
to 3D mode.
Picture Size
Use this function to adjust picture size
of the image/video to MOVIE -
ZOOM,PANORAMA ZOOM / 16:9 (only for HDMI,D2H,Component),
SUPER ZOOM,SMART ZOOM,THEATRE ZOOM,NORMAL / Full (only VGA,
multimedia) ,4:3.
To Next Page
Loading...