· Select desired Wireless Connection by pressing Green Color key .
· Press Yellow key to enter the password of the wireless device.
· Now press green key to connect the wireless device.
· If it does not get connected automatically; press back“ ” key.
· In configuration window press down navigation key and select manual.
· After manual selection of Wi-Fi, press yellow key to enter SSID ; then press green key to scan the
given network.
· After Network scan,Enter Password of Wi-fi device.
· Press Green key to connect to the network.
· Every mains on and off it is necessary to enter the password.
NOTE : To get Wi-Fi Dongle, contact service person.
6. DATACARD : Click on data card option to enter into the data card settings.
Note : The Device Name, Device No., Device Password are given by the Data card provider.
> Device Name: Press Blue Key to edit the device name.
Example :- Tata photon : Tata photon+ (Model No. : EC1261)
Reliance : Reliance netConnect+ (Model No. : ZTE AC2737)
Idea : ideagprs (Model No. : HUAWEI E1732)
> Device number: Press blue key to enter the device number.
Example :- Tata photon : #777
Reliance netConnect+ : #777
Idea : *99#
> Set the Username and Password.
Example :- Tata photon : User name : internet, Password : internet
Reliance netConnect+ : Username : Reliance 10-digit netconnect+ number
Password : Reliance 10-digit netconnect+ number
Idea : User name: internet, Password: internet
> Click on the auto-reconnect option then press green key to Connect or Disconnect the data card.
> Every Mains ON and OFF, it is necessary to enter the password.
“ ”
4. Speed of internet access depends on internet service provider.
5. IP Address and other settings for internet connection will be provided by internet service
6. If Wi-Fi or Data card is not detected then remove the card or dongle from the USB port
and reconnect again.
provider.
NOTES : 1. To get better internet connectivity, use broadband internet connection.
18
2. For better experience, it is suggested to use a LAN connection.
3. Recommended speed for internet is 2Mbps; but its not necessary that constant speed
will be achieved, in that case contact your internet service provider.
To Next Page
Loading...