What to do if there's dew or ice in my Videocon Refrigerator?
If dew or ice forms in your Videocon refrigerator, seal liquid foods with wrap. Ensure foods are cooled down before placing them inside. Avoid opening the door too often and make sure it closes firmly.
What to do if my Videocon VZ34 is freezing food?
If your Videocon refrigerator is freezing food, try placing foods in a higher temperature section. Additionally, adjust the control to either the mid or warm position.
Why is my Videocon VZ34's cooling ability so poor?
If your Videocon refrigerator's cooling is poor, ensure there's about 110cm of space around the unit and it's away from heat-generating appliances. Make sure the ambient temperature is suitable, and only place cooled-down foods inside. Avoid opening the door too frequently and ensure it's closed firmly. Also, set the control to a mid-position.
General| Brand | Videocon |
|---|---|
| Model | VZ34 |
| Category | Refrigerator |
| Language | English |
Details on removing the LED PCB Cover, PCB, and R-Louver assembly.
Instructions for locating and disassembling refrigerator, freezer, and defrost sensors.
Explains the function, components, and notes for compressor usage.
Instructions for entering, operating, and exiting Fast Ice mode.
Guide to entering, operating, and exiting Deep Freezer mode.
Instructions for using the Super Chill mode for rapid cooling.
Sequence and indicators during the refrigerator's hardware self-check.
List of error codes and their corresponding fault types.
Explains the function and components of the PTC-relay.
Properties and safety information regarding R600a refrigerant.
Procedure for discharging and recharging refrigerant in the compressor.
Steps for connecting service tubes, vacuuming the system, and leakage testing.
Flowchart to diagnose compressor issues based on voltage and resistance.
Diagnosing issues with PTC-Starter and OLP components.
Methods and indicators for detecting refrigerant leaks in the system.
Identifying issues related to partial refrigerant leakage.
Diagnosing problems caused by whole refrigerant leakage.
Troubleshooting refrigerant flow blockages and compression problems.
To Next Page
