4-6 How to Set the Passwords Rev AA
Videojet 1710 Operator Manual
level from level 0.
How to Set the Passwords for Levels 1 and 2
Do the following tasks to set the passwords for levels 1 and 2:
1 Press Alt + w and select Set Password for level 1 or Set Password for level 2
from the Password menu (see
Figure 4-5). The New Password dialog box
appears (see Figure 4-6).
2 Enter the new password and press the Enter key. A prompt appears where
you confirm the password.
3 Enter the new password again and press the Enter key.
If the confirmation password is different from the first password entered, the
Change Password dialog box appears (see
Figure 4-8).
Press Esc key to return to the New Password dialog box.
Else, the new password is saved and the Menu screen appears.
Figure 4-4: Level 0 Password
Figure 4-5: Set Password Level
Figure 4-7: Confirm Password
To Next Page