VIDEOJET 1710 - Shortcut Keys

Rev AA Introduction 5-3
Videojet 1710 Operator Manual
Shortcut Keys
To access the different menus in the main menu, hold the Alt key, and press the
highlighted character. The menu and the shortcut key are shown in
Table 5-1.
* - These shortcut keys appear only in Editor menu.
Note: The Alt key takes the priority over the Ctrl key if both the keys are held
together.
To Enter the Text, Numbers and Toggle Values
Menu Shortcut Key
Messages ALT+M
Editor ALT+E
User Fields ALT+U
Print ALT+P
Password ALT+W
System ALT+S
Configure ALT+C
Calibrate ALT+L
Data Logging ALT+D
Start Printing (or Stop
Print if the printer is in
the print mode)
ALT+F1
New Message ALT+F2
Message Parameters ALT+F3
Edit User Field ALT+F4
Quick Start (or Quick
Stop if the jet is in
operation)
CTRL+F1
Nozzle Flush CTRL+F2
Continuous Print CTRL+F3
Copy From USB CTRL+F4
Table 5-1: Shortcut Keys
Text Use the keypad to enter the required text, or special characters.