Videonics AB-1 Edit Suite - Page 71

In the above example, a copy of event 003 is placed after event 001. The copy is assigned the next
available event number–005 in this case.
To place the new event before the active event, instead of pressing [PASTE], press [SHIFT]+[PASTE].
After [PASTE] or [SHIFT]+[PASTE] is pressed (Step 3), the paste buffer is empty. To make another
copy of the event, repeat the procedure.
To Make a Copy of a Group of Events–
1. Display any
event in the
group of events
to be copied
and press
[SHIFT]
+[COPY].
2. Display the
new location
for the copied
group of events.
3. Press
[PASTE].