66550033-EN - V6.1 - 15/08/20
- 32 -
ESVK/6388 Series “2 wire Bus” videokit
ESVK/6388 Series - Installation handbook
Art.4042 .. 4045 Single row button expansion modules
Art.4042D .. 4045D Double row button expansion modules
ADHESIVE GASKET PLACEMENT
Apply the
Y
seal as shown in Fig. 6.
ANTITAMPERING LOCKS FIXING
Fit the anti-tampering locks
W
as shown in Fig. 7.
Y
G
Fig. 6
W
Fig. 7
TECHNICAL SPECIFICATIONS
Power Supply: 12Vdc supplied by the at
Power Consumption: 40 mA max
Working Temperature: -10 +50 °C
CLEANING OF THE PLATE
Use a clean and soft cloth. Use moderate warm water or non-ag-
gressive cleansers.
Do not use:
• abrasive liquids;
• chlorine-based liquids;
• metal cleaning products.