Viessmann EM-P1 - Product Specification; Technical Specification Details

14
Pos. Part
0001 Extension
0004 Connecting cable 40
0005 PlusBus cable with plug 74
0006 ADIO/M2IO plug set
0013 Strain relief fittings
0014 Fuse, 2.0 A (slow) 250 V (10 pce)
0015 Installation and service instructions
Specification
Rated voltage 230 V~
Rated frequency 50 Hz
Rated current 1 A
Power consumption 1.5 W
Power consumption 7 mA
Protection class I
IP rating IP 20D to EN 60529, ensure
through design/installation.
Permissible ambient temperature
■ Operation 0 to +40 °C
■ Storage and transport –20 °C to +65 °C
Rated breaking capacity, relay output, heating
circuit pump
sÖ
1 A 230 V~
Immersion temperature sensor, low loss header
Sensor type NTC 10 kΩ, at 25 °C
IP rating IP 53 to EN 60529; ensure through design/
installation.
Permissible ambient temperature
■ Operation 0 to +120 °C
■ Storage and transport −20 °C to +70 °C
Parts list
(cont.)
5831394