68
Commissioning with the commissioning assistant
The commissioning assistant automatically guides you
through all the menus where settings have to be made.
For this, "Coding level 1" is automatically active.
!
Please note
Incorrect operation at "Coding level 1" may
result in damage to the appliance and the heat-
ing system.
Observe the service instructions for the "Vito-
tronic 200", otherwise the appliance warranty
will be void.
Switch ON the ON/OFF switch on the control unit.
■
The prompt "Start commissioning?" appears auto-
matically on commissioning.
Note
The commissioning assistant can also be started
manually:
To do this, press and hold when switching on the
control unit (progress bar visible).
■
When the unit is first commissioned, the display is in
German.
Sprache
Dansk
Cesky
Bulgarski
Deutsch
Wählen mit
ê
ê
ç
DE
BG
CZ
DK
ê
ê
(
Fig. 61
■
Manually switching some appliance components dur-
ing commissioning enables the control unit to display
messages. These messages are not appliance
faults.
Commissioning, inspection, maintenance
Commissioning the system (cont.)
6199585
To Next Page
Loading...
