To Next PageTo Next Page
Need help?Do you have a question about the Viessmann VITOCAL 160-A and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Energy efficiency class (heating) | A++ |
| Energy efficiency class (cooling) | Not applicable |
| Power supply (outdoor unit) | 230 V, 50 Hz |
| Power supply (indoor unit) | 230 V / 50 Hz |
Energy from ambient air used for domestic hot water heating.
Vitocal 160-A operates in circulating or extract air mode.
Discusses noise generation from the heat pump unit.
Overview of the Vitocal 160-A heat pump, its capacity, and features.
Technical specifications including output, DHW cylinder, electrical values, and dimensions.
Covers components for expelled air outlet, like wall connections and roof outlets.
Details extract air valves and ventilation air elements for air circulation.
Discusses components for noise reduction in air pipework systems.
Lists various pipes, bends, and connectors for air ducting systems.
Describes the safety assembly required for DHW cylinders.
Information on connecting solar collectors to the WWKS model.
Guidance on optimal installation location and requirements for the heat pump.
Measures to reduce noise and vibration transmission from the unit.
Details how to connect the unit to the power supply safely.
Instructions for routing condensate from the heat pump to a sewer.
How to connect the WWKS model to a solar thermal system.
Requirements for DHW connections and circulation lines for proper operation.
Specific design considerations for operating the unit in extract mode.
Guide to calculating pressure drop in air pipework for optimal performance.
Instructions for connecting solar collectors and sizing expansion vessels for the WWKS model.
A worksheet to help design individual sections of the air pipework.
A worksheet to help calculate the total pressure drop in the air pipework.
A visual representation of the complete extract/expelled air pipework system.
