6
Enamelled cylinder for DHW heating in combination
with a Vitotrans 222 heat exchanger set (or other cylin-
der loading systems) or a heating lance for DHW heat-
ing in combination with a heat pump.
Additionally, the use of an immersion heater is possi-
ble.
Capacity: 500, 750 and 950 l
Suitable for systems to DIN 1988, EN 12828 and
DIN 4753
Inspection and maintenance
DIN 1988 requires a visual inspection and (if neces-
sary) cleaning no later than 2 years after the cylinder
has been commissioned, and thereafter according to
requirements.
Note
We additionally recommend checking the function of
the protective magnesium anode annually. This func-
tion check can be made without interrupting operation
by measuring the earth current with an anode tester
(see page 8).
System examples
Available system examples: See www.viessmann-
schemes.com.
Spare parts lists
Information about spare parts can be found on the
Viessmann spare parts app.
Information
Product information
5677344
Information
To Next Page
Loading...
Need help?
General
