Supplied By www.heating spares.co Tel. 0161 620 6677
Please follow these safety instructions closely to prevent accidents and
material losses.
Safety instructions explained
!
Important information
This symbol warns against the
risk of material losses and
environmental pollution.
Note
Details identified by the words "Note"
contain additio nal information.
Safety regulations
Installation, initial start-up, inspection,
maintenance and re pairs must be car-
ried out by a competent person
(heating engine er/installati on contrac-
tor).
Observe all current sa fety regulations
as defined by DIN, EN, DVGW, TRGI,
TRF, VDE or all locally applicable
standards.
See also the "safety instructions" in
the "Vitotec Technical Guide" folder.
Before working on the equipment/
heating syste m, isolate the mai ns
electrical supply (e.g. by removing a
separate mains fus e or by means of a
mains electrical isolator) and safe-
guard against unauthorised reconnec-
tion.
Close the main gas shut-off valve and
safeguard against unauthorised
reopening.
Electrical assemblies prov ided on site
must be type-app roved.
Work on gas equipment
This must only be carried out b y an
approved gas fitter.
Observe all commissioning work spe-
cified for gas installations to TRGI or
TRF and all local regulations.
Safety instructions
2
5862 566 GB
To Next Page
Loading...
