To Next PageTo Next Page
Need help?Do you have a question about the Viessmann Vitodens 100-W B1KF-30 and is the answer not in the manual?
General| Model | Vitodens 100-W B1KF-30 |
|---|---|
| Category | Boiler |
| Output | 30 kW |
| Energy Efficiency Class | A |
| Heat Exchanger Material | Stainless Steel |
| Mounting | Wall-mounted |
| Max. Flow Temperature | 85 °C |
| Fuel Type | Natural Gas |
| Control System | Vitotronic |
| Type | Condensing |
| Water Pressure | Max. 3 bar |
Steps to prepare water, gas, and electrical connections before boiler mounting.
Steps for physically mounting the boiler and making primary water and gas connections.
Connecting heating water, DHW, condensate, and flue gas systems.
Guide to wiring, sensors, power, and WiFi configuration for boiler operation.
Steps for initial setup: filling, venting, gas type configuration, and WiFi activation.
Performing pressure tests, fault checks, burner adjustments, and safety checks.
Configuration options for flow temperature, pump modes, scald protection, and heating outputs.
How to view, acknowledge, and access fault messages and their history.
Detailed list of fault codes, system characteristics, causes, and corrective measures.
Technical data for the boiler, including output, pressure, and power consumption.
