To Next PageTo Next Page
Need help?Do you have a question about the Viessmann VITODENS 100-W B1HE and is the answer not in the manual?
General| Model | VITODENS 100-W B1HE |
|---|---|
| Category | Boiler |
| Modulation Ratio | 1:10 |
| Heat Exchanger Material | Stainless steel |
| Water Pressure | Max. 3 bar |
| Type | Wall-mounted |
| Efficiency | Up to 98% |
| Fuel Type | Natural gas |
| Vent Type | Room sealed |
| Control | Vitotronic |
| DHW Heating | Yes |
| Temperature Range | 30 to 80°C |
| Dimensions | 360 mm x 400 mm x 700 mm |
| NOx Emissions | Class 6 (20 mg/kWh) |
Emphasizes documentation, licensed contractors, and warranty adherence for safe and proper installation.
Details hazards from contaminated air, improper venting, and carbon monoxide poisoning.
Outlines owner's duties regarding system operation, safety, and annual professional service.
Defines the boiler's purpose, features, and operating modes like weather-compensated and constant operation.
Covers commissioning, preset configurations, and tips for energy efficiency and comfort.
Explains the control unit, display, buttons, and system overview for user interaction.
Details how to navigate system overviews and access the main menu for adjustments.
Guides users on how to input and configure time programs for central heating and DHW based on time phases.
Explains how to set and adjust the domestic hot water temperature, with safety warnings about scalding.
Details how to initiate a single instance of DHW heating outside the programmed schedule.
Explains how to activate a hygiene program to heat water to higher temperatures weekly or daily.
Describes how to enable or disable scald protection for DHW to prevent burns.
Guides users on adjusting screen brightness and enabling/disabling the control unit's status light.
Covers setting the system's time, date, and preferred language for operation.
Instructions for establishing an internet connection via WiFi for remote system control.
Covers setting energy metering values and restoring the system to its original factory default settings.
How to retrieve help messages and view current system data like temperatures and group information.
Accessing energy consumption data and software licence information for the unit and wireless module.
Procedures for checking and noting other system faults, contacting the contractor, and navigating error messages.
How to view a history of all past system messages, including faults, warnings, and information.
Instructions for activating the emissions test mode, intended for licensed contractors during annual inspections.
Procedure for testing the high limit safety cut-out function of the boiler system.
Detailed steps for powering on the boiler, checking system pressure, and ensuring readiness for operation.
Identifies reasons for cold rooms, such as boiler shutoff or incorrect settings, and provides solutions.
Lists potential causes for lack of hot water, from boiler switch-off to fuel supply issues, and their fixes.
Guidelines for cleaning the boiler surface and internal components of the DHW tank, recommending professional service.
Details regular inspection requirements for the boiler, DHW tank, safety valves, and water filters for optimal performance and safety.
Lists available information and settings within the main menu related to heating, including temperatures and operating programs.
Details main menu options for DHW settings, time programs, and network status.
Defines terms like Standby mode, Operating program, Operating status, and different heating operations.
Explains heating curves, slope, and shift settings to illustrate the relationship between outside temperature and supply temperature.
Crucial safety steps before operating the boiler, including gas leak checks and emergency procedures.
Step-by-step instructions for starting up and safely turning off the boiler, including gas control.
