To Next PageTo Next Page
Need help?Do you have a question about the Viessmann VITODENS 100-W B1HC and is the answer not in the manual?
General| Model | VITODENS 100-W B1HC |
|---|---|
| Category | Boiler |
| Heat exchanger material | Stainless steel |
| Control unit | Vitotronic 100 |
| ErP rating heating | A |
| Max flow temperature | 80°C |
| Type | Wall-mounted condensing boiler |
| Fuel type | Natural gas |
| Control | Vitotronic |
| Water pressure | 3 bar (Maximum) |
Explanation of safety symbols and general safety advice.
Critical warnings for operating the system, including gas/flue gas safety.
Guidance on preparing the boiler for installation, including dimensions.
Instructions for preparing power and accessory electrical connections.
Step-by-step guide for physically installing the boiler and its primary connections.
Detailed procedures for gas, safety valve, and condensate drain connections.
Connecting power, accessories, sensors, and wiring diagrams.
Procedures for filling and venting the heating system.
Changing gas type, checking gas pressure and equipment tightness.
Understanding the sequence of operations and identifying potential faults.
Explains fault codes shown on the display and their meanings.
Comprehensive diagram showing electrical connections and component identification.
