To Next PageTo Next Page
Need help?Do you have a question about the Viessmann VITODENS 100-W B1KC and is the answer not in the manual?
General| Model | VITODENS 100-W B1KC |
|---|---|
| Category | Boiler |
| Efficiency | Up to 95% AFUE |
| Vent Type | Direct vent |
| Energy Star Certified | Yes |
| Heat Exchanger Material | Stainless Steel |
| Water Pressure (max) | 3 bar |
| Type | Condensing |
| Fuel Type | Natural Gas or Propane |
| Control | Digital |
Provides critical safety guidelines for installation and maintenance work.
Critical safety measures for running the appliance, including gas and flue gas checks.
Describes the proper installation and operation purpose of the appliance.
Instructions for installing the wall mounting bracket for the boiler.
Details on physically mounting the boiler and connecting it to utilities.
Procedures for safely connecting the gas supply to the boiler.
Instructions for connecting the safety valve and condensate drain pipes.
Guidelines for installing the balanced flue system correctly.
Guidance for connecting electrical components and accessories.
Safety regulations and procedures for connecting the main power supply.
An overview of the procedures for commissioning, inspection, and maintenance tasks.
Step-by-step guide to filling the heating system with water.
Procedure for venting the boiler to remove air and prevent damage.
Instructions for converting the boiler from LPG to natural gas.
Procedures for checking and adjusting gas pressures for safe operation.
How to adjust the boiler's maximum heating output to suit system requirements.
Adjusting the circulation pump speed for optimal system performance.
Adjusting burner output based on flue system length and configuration.
Procedures for adjusting burner settings in multi-boiler installations.
How to measure CO2 levels to check flue integrity and burner adjustment.
Verifying the expansion vessel's charge pressure and overall system pressure.
Ensuring the flue system is clear, properly sealed, and safe.
Performing a final gas tightness check under operational pressure.
Detailed procedure for converting the boiler between gas types.
Steps to configure the control unit after a gas type conversion.
Technical specifications for the system boiler model.
Technical specifications for the combi boiler model.
