To Next PageTo Next Page
Need help?Do you have a question about the Viessmann Vitogas 100 GS1 Series and is the answer not in the manual?
General| Type | Gas Condensing Boiler |
|---|---|
| Fuel Type | Natural gas |
| Heat Exchanger Material | Stainless Steel |
| Efficiency | Up to 98% |
| Control System | Vitotronic |
| Operating pressure | Max 3 bar |
Key requirements for safe installation and regulatory compliance.
Guidance on understanding symbols and notations used in the manual.
Details about the Vitogas 100, GS1 boiler and its capabilities.
Recommendations for the location and requirements of the mechanical room.
Overview of different methods for installing the boiler.
Ensuring all necessary accessories are installed before boiler placement.
Specifies required distances around the boiler for safe operation and service.
Guidance on positioning and leveling the boiler during installation.
Steps for installing the boiler control base unit.
Instructions for wiring the boiler and its components.
Guidelines for connecting the boiler's vent system to the chimney or vent.
Procedures for safely connecting the gas supply line to the boiler.
Details on connecting heating water pipes to the boiler.
Installing safety devices and performing hydrostatic pressure tests.
Connecting the boiler to a domestic hot water storage tank.
Ensuring adequate air for combustion and safe boiler operation.
Requirements for ventilation openings for proper air exchange.
Steps to take after installation is complete.
Essential steps for initial boiler start-up.
Instructions for filing and storing service documentation.
Specifications and performance data for the boiler models.
Schematics for electrical connections and system wiring.
