Viessmann VITODENSd 100-W User Manual

Technical Data Manual
VITODENS
d
100-W
5601 189 v1.1 09/2011
Vitodens 100-W
WB1B Series
Wall-Mounted, gas-fired condensing boiler
with optional on demand hot water CombiPLUS Kit
Heating input: 37 to 118 MBH
10.8 to 34.5 kW
Model Nos. and pricing: see Price List
Vitodens 100-W, WB1B
(with pre-installed coaxial vent pipe adaptor)
CombiPLUS Kit
Gas-Fired Wall-Mounted Condensing Boiler with modulating
stainless steel MatriX cylinder burner, stainless steel Inox-
Radial heat exchanger for room air independent operation
(using a direct vent system) or room air dependent operation.
Optional CombiPLUS Kit providing reliable on demand hot
water without a DHW tank is available.

Viessmann VITODENSd 100-W Specifications

General

Heat Exchanger Material	Stainless Steel
Mounting	Wall-mounted
Water pressure	Max. 3 bar
Type	Wall-mounted gas condensing boiler
Fuel Type	Natural Gas / Propane
Efficiency	Up to 98%
Control System	Vitotronic (various models)
DHW Production	Yes
Weight	Approx. 42 kg
Noise level	Less than 45 dB(A)

Summary

General

Product Overview and Features

Describes the Vitodens 100-W boiler's core technology, benefits, and advanced features.

Technical Data

Standard Heating Boiler Specifications

Detailed technical specifications for the standard heating boiler models.

CombiPLUS Specifications

Technical details and performance data for the integrated CombiPLUS unit.

Dimensions

Boiler Minimum Clearances

Specifies the required space around the boiler for safe operation and maintenance.

Operation

Heating Circuit Pumps

Information on pumps for the heating system and their performance characteristics.

CombiPLUS DHW Performance

Installation

Mounting and Wall Mounting

Instructions and diagrams for physically installing the boiler and CombiPLUS unit.

Condensate Management

Venting and Electrical Connections

Information on venting systems, electrical hookups, and the boiler control unit.

Standard Equipment and Installation Examples

Design

System Design Considerations

Key factors for system design: boiler location, flue systems, water conditions, and underfloor heating.

Venting

Coaxial Venting Systems

Two Pipe Venting Systems

Single Pipe Venting Systems

Flexible Venting Systems