Viessmann VITOPEND 200 Installation And Service Instructions

The DIP switches ar e located on the PCB in the t op part of the housing .
Remote control
affects
DIP switch set-
ting
Heating circuit
without mixer A1
Heating circuit
with mixer M2
When connecting a separate room
temperature sensor, set DIP switch
"3" to "ON".
Remote control DIP switch
110
Function description
5862 831 GB

Viessmann VITOPEND 200 Specifications

General

Fuel Type	Natural gas
Max. Heat Output	24 kW
Efficiency	Up to 98%
Control System	Vitotronic
Water Pressure	Max. 3 bar
Type	Wall-mounted condensing boiler