Need help?Do you have a question about the Viessmann VITOPLEX 100 and is the answer not in the manual?
General| Model | VITOPLEX 100 |
|---|---|
| Category | Boiler |
| Fuel Type | Oil/Gas |
| Heat Exchanger Material | Steel |
| Control | Vitotronic control unit |
| Output Range | 90 to 2000 kW |
| Application | Commercial |
| Heating Capacity | 24 kW to 100 kW |
| Operating Pressure | Up to 6 bar (depending on model) |
| Weight | Varies by model |
| Dimensions (HxWxD) | Varies by model |
| Warranty | 5 years |
Explains warning symbols for injury and material loss, and notes for additional information.
Specifies that instructions are exclusively for qualified contractors.
Lists statutory regulations and codes of practice to observe during work.
Provides critical safety steps for gas detection to prevent explosions and injury.
Defines the appliance's intended purpose and limitations for heating water.
Lists steps for commissioning, inspection, and maintenance with page references.
Details the procedure for filling, venting, and starting the heating system.
Covers procedures for shutting down the system and opening/closing the boiler door.
Describes cleaning turbulators, heating surfaces, flue outlets, and inserting turbulators.
Guidance on quoting part numbers, serial numbers, and position numbers for spares.
Lists and illustrates various parts, accessories, and wearing parts for the boiler.
Outlines necessary water quality standards to safeguard warranty and prevent damage.
Details measures to prevent scale build-up and requirements for fill/top-up water.
Discusses measures to prevent corrosion on the heating water side, focusing on oxygen absence.
Provides guidelines and precautions for using antifreeze in boiler systems.
Presents flue gas parameters and efficiency ratings for different heating outputs.
States compliance with specified standards and directives for the boiler.
Lists serial numbers and contact information for applicability and technical modifications.
To Next Page
