Need help?Do you have a question about the Viessmann VITOSOL 100-F and is the answer not in the manual?
General| Type | Flat-plate collector |
|---|---|
| Absorber Area | 2.2 m² |
| Weight | 42 kg |
| Aperture area | 2.3 m² |
| Absorber material | Copper |
| Maximum operating pressure | 6 bar |
| Maximum operating temperature | 120 °C |
| Gross area | 2.5 m² |
Emphasizes using genuine parts and avoiding unauthorized modifications for safety.
Guidelines for safe repair practices and using genuine Viessmann spare parts.
Procedure for checking and adjusting system pressure and expansion vessel pre-charge.
Step-by-step guide for filling, flushing, and leak checking the system.
Procedure to check and set the correct system flow rate.
Steps for safely initiating the operation of the solar thermal system.
Guidance on checking heat transfer medium quality and replacement procedures.
To Next Page
