Viessmann VITOSOL 100-F Datasheet

VITOSOL 100-F Type SV1 and SH1
Flat-plate collec tors for installation on end or across,
for install ation on flat an d pitched roofs and for frees tand-
ing installation.
Type SH1 also for installation on walls.
For heating DHW and swimming pool water via a heat
exchanger.
VIESMANN
Datasheet
Part numbers and prices: see pricelist
VITOSOL 100-F
Flat-plate collector for the utilisation of solar energy
File in: Vitotec folder, register 13
5822 407 GB 8/2007

Viessmann VITOSOL 100-F Specifications

General

Type	Flat-plate collector
Absorber Area	2.2 m²
Weight	42 kg
Aperture area	2.3 m²
Absorber material	Copper
Maximum operating pressure	6 bar
Maximum operating temperature	120 °C
Gross area	2.5 m²