Viessmann VITOSOL SERIES Technical Guide

VIESMANN
VITOSOL
VITOSOL 200-F, 300-F
Flat-plate collector, type SV and SH
for installation on flat and pitched roofs as well as for roof inte-
gration and freestanding installation,
type SH also for installation on walls
Large area flat-plate collector, type 5DI
for roof integration on pitched roofs with tile cover
VITOSOL 200-T
Type SD2 and SD2A
Direct flow vacuum tube collector for installation on pitched and
flat roofs, on walls and for freestanding installation
VITOSOL 200-T
Type SP2
Vacuum tube collector, based on the heat pipe principle, for
installation on pitched and flat roofs, on walls and for free-
standing installation
VITOSOL 300-T
Vacuum tube collector, based on the heat pipe principle, for
installation on pitched roofs and for freestanding installation on
flat roofs
5822 440 GB 5/2010
Technical guide

Viessmann VITOSOL SERIES Specifications

General

Frame Material	Aluminum
Insulation	Mineral wool
Type	Flat plate collector
Absorber Material	Copper
Absorber Coating	Selective coating
Glazing	Tempered glass
Weight	Approx. 45 kg
Maximum Stagnation Temperature	200°C
Connection Size	3/4"