5
Your remote control is connected to the
Vitotronic control unit of the boiler by
means of a wireless connection. The
commissioning and adjusting of the
Vitotronic control unit to local conditions
and to the structural characteristics of
the building, plus the instruction of the
user in operating the system, must be
carried out by your heating contractor.
The settings made at the Vitotronic con-
trol unit are transferred to the remote
control during commissioning. The
Vitotronic control unit is factory-set to
"Heating and DHW".
In other words, the rooms that you are
controlling with your remote control are
heated in accordance with the time pro-
gram that has been set at the Vitotronic
control unit, alternating between stand-
ard and reduced room temperature.
DHW heating will also take place in
accordance with the settings from the
Vitotronic control unit.
Power failure
■ All data is saved if there is a power
failure.
Terminology
To provide you with a better understand-
ing of the functions of your remote con-
trol unit, the appendix contains a chapter
entitled "Terminology".
Introductory information
Commissioning
5592 697 GB
To Next Page
