3. To remove stations listed but unavailable, select the station you would like
to remove, press and hold “INFO/MENU” button, repeatedly press the “ ”
or “ ” button until “Prune” shows up, press “OK”, “Prune? <No> Yes” will
show up, press “ ” or “ ” button to select.
4. You can also manually tune to a particular channel, press and hold “INFO/
MENU” button, repeatedly press the “ ” or “ ” button until “Manual
tune” shows up, press “OK” button, then press “ ” or “ ” button to select
the channel/frequency you would like to listen to.
5. To store a station in a preset memory, in DAB mode, select the station you
would like to store, press and hold “OK” button to enter “Preset” menu,
press the “ ” or “ ” button repeatedly until “Preset Store” shows up,
press “OK” button, “Preset Store <X: (empty)” will show up, press the
“ ” or “ ” button to select the position you would like to store, press “OK”
button, “Preset X stored” will show up and return to former playing screen.
You can store 10 DAB stations in total.
DAB Operation
DAB mode receives DAB/DAB+ digital radio and displays information about the
station and programme.
1. Turn the switch at the top of the unit to “ON” to switch on the radio. Press
“DAB/FM” button repeatedly until the display shows “DAB Mode”.
“Welcome to Digital Radio” will be displayed. If you turn on the radio for
the rst time, it automatically performs a full scan to see what stations
are available. If it’s not the rst time, press and hold “INFO/MENU” button,
select “Full scan”, then press “OK” button to activate full scan. It will show
the progress of the scan and the number of stations found during the scan
will also be displayed. Your radio will start playing the previously-selected
station or rst station available after the scan is complete. If there’s no
signal, “No DAB station” and “Service not available” will be shown on the
screen.
2. In DAB mode, you can press “ ” or “ ” button repeatedly to scroll upward
or downward through the station list, when you nd the station you would
like to listen to, press the “OK” button to tune to that station.
To Next Page
Loading...
Need help?
General
