To Next Page

To Previous Page

Installing the Display

Installing the Stand

Screw: M4 X L10 x4

Screw: T4 X L12.5 x4

Screw: T4 x L12.5 x4

Place the display face down on a protective surface. Then insert the neck onto the

bottom stand and secure the parts by inserting the screws and tightening them with

the screwdriver.

Note: Attaching the stand requires two people.

Disconnecting the Stand

To remove the stand, loosen the screws in the circled area and the neck will come

off.

Screw: T4xL12.5 x4

ViewSonic CDE3203 User Manual

Other manuals for ViewSonic CDE3203