EasyManua.ls Logo

ViewSonic CDE6520-W - User Manual

ViewSonic CDE6520-W
67 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CDE6520/CDE7520/CDE8620
CDE6520-W/CDE7520-W/
CDE8620-W
Commercial Display
User Guide
Model No. VS17908/VS17909/VS17910
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service. Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”

Table of Contents

Questions and Answers

  • J
    John CostaAug 7, 2025
    What to do if my ViewSonic CDE6520-W power indicator is on but there is no image?
    • D
      daviddicksonAug 7, 2025
      If the power indicator is on but no image is displayed on your ViewSonic Monitor, the video wire might be detached or improperly connected. Try connecting or replacing the video wire, ensuring it is properly connected. Also, check the signal source to make sure it is properly connected at the output end, as there may be no video signal input.
  • J
    Julia JenningsAug 11, 2025
    How to fix dim or extremely bright screen on ViewSonic Monitor?
    • K
      Kristina SandersAug 11, 2025
      If your ViewSonic Monitor screen is dim or extremely bright, the brightness or contrast settings may be set too low or too high. Check the brightness and contrast settings, or restore them to the default settings.
  • A
    austin40Aug 15, 2025
    How to turn on ViewSonic Monitor if the power indicator does not come on?
    • A
      Amy GrayAug 15, 2025
      If the power indicator on your ViewSonic Monitor does not come on, the monitor may not be powered on. Check if the power cord is connected and switch on the monitor.
  • M
    Marcus HarrisAug 19, 2025
    Why is there no sound on my ViewSonic CDE6520-W?
    • D
      Daniel RamirezAug 20, 2025
      If there is no sound on your ViewSonic Monitor, the audio wire might be detached or improperly connected. Ensure it is properly connected at the input end. Also, check if the monitor is muted and reset the volume if necessary.
  • H
    hannahfoxAug 25, 2025
    How to correct color difference on ViewSonic CDE6520-W?
    • J
      Jennifer HarrisAug 25, 2025
      To correct color differences on your ViewSonic Monitor, check the chromatic saturation. Additionally, adjust the RGB values or reset the color temperature, or restore to default settings.
  • K
    kimberlywalterAug 28, 2025
    What causes image jerking or ripple on ViewSonic Monitor?
    • A
      Amber OwensAug 28, 2025
      Image jerking or ripple on your ViewSonic Monitor can be caused by an electric device interfering with the video signals. Turn off the electric device or relocate the monitor.
  • P
    Paula GreenSep 2, 2025
    How to fix image distortion on ViewSonic CDE6520-W Monitor?
    • J
      Julie VangSep 2, 2025
      If you are experiencing image distortion on your ViewSonic Monitor, it might be due to an improper aspect ratio. Reset the aspect ratio to correct this.

ViewSonic CDE6520-W Specifications

General IconGeneral
Screen Size65 inches
Brightness350 cd/m²
Contrast Ratio1200:1
Response Time8 ms
Panel TypeIPS
Aspect Ratio16:9
Operating Temperature0°C to 40°C
Storage Temperature-20°C to 60°C
Viewing Angle178° horizontal / 178° vertical
ConnectivityHDMI, DisplayPort, VGA, USB
Speakers2 x 10W
Resolution3840 x 2160 (4K UHD)

Related product manuals