19
• Days of the week: Set Sunday,
Monday,Tuesday, Wednesday, Thursday,
Friday, Saturday.
• Every week: Set lifecycle.
• Back: Does not change schedule data.
• Save: Save schedule data.
Slideshow interval
Setting the photo slideshow interval for USB auto
play.
OSDturno
Set the period of time the OSD (on-screen display)
menu stays on the screen.
The options are: {O, 5 ~ 120} seconds.
*{0} does not disappear automatically.
Information OSD
Set the period of time the information OSD is
displayed on the upper left corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {O} selection. The options are: {1 ~ 60}
seconds.
Time reset
Reset all settings in Time menu to the factory
preset values.
6.1.5. Advanced
Panel saving
Choose to enable the panel saving functions and
thus reduce the risk of “image persistence” or
“ghost-imaging”.
• {Saving} - Select {On} and the image
brightness will be reduced to an appropriate
level. The Brightness setting in the Picture
menu will be unavailable when selected.
• {Burn-in Protection Interval} - Select the time
interval ({Auto} / {10 ~ 900} Seconds/ {Off}) for
the display to reduce the "image persistence".
Audio reset
Reset all settings in the Audio menu to factory
preset values.
6.1.4. Time
OTimer
Set automatically power o time (in hours).
Date and time
Adjust the current date and time for the display’s
internal clock.
Schedule
This function allows you to program up to 7 (seven)
dierent scheduled time intervals for the display to
activate.
Schedule list:You can set 7 schedules.
• Enable: Enable/disable schedule. If set start/
end time is conflict or empty, input is empty
or time conflict with other schedule list, you
cannot enable schedule.
• Start time: Set start time.
• End time: Set end time.
• Input: Platform will go to this select source
automatically after the schedule on.
To Next Page
Loading...
Need help?
General