21
Factory reset
Reset all settings in the OSD menus of {Picture},
{Screen}, {Audio}, {Time},
and {Advanced} to the factory preset values.
Advanced option reset
Reset all settings in the Advanced menu to factory
preset values.
6.1.6. About
Heat status
This function allows you to check the thermal
status at any time.
Monitor information
Shows information about your display, including
model number, serial number, operating hours and
software version.
7. Embedded Applications and
Settings
7.1. USB media playback
1. Copy media content to the root directory of a
USB Flash drive. USB Flash drive should be
formatted as FAT32.
2. Enable the USB auto play on OSD
3. Plug in USB Flash drive to USB port and it will
copy the media content to internal storage.
4. After copy nished and unplug the USB Flash
drive, it will auto play the content.
5. Press EXIT key can stop the media playback.
User can press MediaPlayer icon
on
launcher to play the content again.
To Next Page
Loading...
Need help?
General