4
2. Parts and Functions
2.1. Control Panel
1
5
2
3
4
1
Press to On or O the display.
2
Press the MENU key to enter the main menu, and it conrms the operation in the SOURCE menu.
3
Press the INPUT key to enter the input source menu, and to select the signal source.
It is used to conrm the operation under the MENU operations.
4
In the OSD menu, press the ◄/► key to adjust the value of the selected item.
5
Press the ▲/▼ key to select an item in the OSD menu. And it also use to adjust the volume up and
down.
To Next Page
Loading...
Need help?
General