ViewSonic E95 - Page 58

£95-1 Adjusti
6.1.4 Adjust FOCUSPHASE to get horizontal parabolic waveform at center with video signal center by
pressing adjust “A” and “W”.
<+—» ___ FOCUSPHASE
6.2 Dynamic focus parabolic waveform adjustment
6.2.1 Apply 30KHz / 50Hz, 95KHz / 150Hz timing display size width: 357mm, height: 268mm ,
H-FOCUS = 50% , V-FOCUS = 50%.
6.2.2. Input VGA 640x480 / 60Hz full white pattern
6.2.3 Select FACTORY PARAMETER to 31KHZ.
6.2.4 Adjust horizontal parabolic waveform to get 370 + 10Vp-p by pressing adjust “A” and “W”. |
+<_——______»>
fH |
370Vp-p
i
H
i
t
|
|
4
|
!
i
i
|
‘
;
i
6.2.5 Input 30KHZ/ 50HZ full white pattern, select FACTORY PARAMETER to 50Hz.
6.2.6 Adjust vertical parabolic waveform to get 170Vp-p+5Vp-p by pressing adjust “A” and “W”.
6.2.7 Input VESA 1600x1200/75Hz full white pattern.
6.2.8 The OSD select FACTORY PARAMETER to 95KHz.
6.2.9 Adjust horizontal parabolic waveform to get 370 + 10Vp-p by pressing adjust “A” and “W”.
6.2.10 Input 95KHz / 150Hz full white pattern, the OSD select FACTORY PARAMETER to 150Hz.
55
es
ViewSonic Corporation _