ViewSonic E95 - Page 59

6.2.11 Adjust vertical parabolic waveform to get 170Vp-p + 5Vp-p by pressing adjust “A” and “W”.
170Vp-p
7. Focus adjustment
7.1 Set BRIGHTNESS at 50% AND CONTRAST at 100%.
7.2 Apply signal (all “ME” pattern) at VESA1024x768 / 75Hz mode.
7.3 Disconnect the RED and BLUE video input so as to produce a green only screen.
7.4 Set FOCUS CONTROL F1, F2 for best focus at midpoint of diagonal line from 10:00 corner to center of
screen. F1 control for VERTICAL LINE; F2 control for HORIZONTAL LINE; individual; pixels should
be distinguishable over entire display area.
8. Video preset condition
8.1 Apply VESA 1024x768 / 75Hz.
8.2 Display size width: 357 + 4mm, height: 268 + 4mm.
8.3. CONTRAST 100
8.4 BRIGHTNESS “100”
8.5 RCUT, GCUT , BCUT “30”
8.6 RGAIN, GGAIN, BGAIN “200”
8.7 G1 “100” (Range 50 ~ 205)
9. Video alignment
9.1 Video cut off adjustment
9.1.1 Adjust VR601 to get the raster 0.2 ~ 0.4FLS (Center = 0.3FLS) (E95-1).
9.1.2 Adjust “RCUT”, “GCUT”, “BCUT” to get color coordination.
x=0.28340.010 , y=0.297+0.010
9.1.3 Adjust “VR601” to get the raster Y=0.6 + 0.2FLS (E95-1)
56
pacha
rash
sche
ViewSonic
Corporation
.
a