ViewSonic E95 - Page 61

10. X-RAY adjustment/FACTORY MODE disable
10.1 X-RAY adjustment & check
10.1.1 Input 640X480 /31.5Kz mode, cross-hatch pattern.
10.1.2 Set CONTRAST 100%, BRIGHTNESS 50%.
10.1.3 Use 47K 1% parallel with R4123 12K (P402).
10.1.4 Adjust VR401 let picture shut down.
10.1.5 Use 60K 1% parallel with R4123 12K 1% (P402) , the picture must be OK.
10.2 Factory mode enable/disable
10.2.1 Press “ENTER” key until push power knob on/off four times that can enable factory mode. If press
“A” key until push power knob one time that can disable factory mode.
10.2.2 Press “W”key until push power knob four times, that can enable burning mode and can use fixture to
adjust picture. If press r “MENU” key until push power knob one time, that can disable burning mode.
D. Fixture Function Description
1. Fixture adjust.
Adjust Program
H. Position Rotation B Drive 255
H. Size HDBF_31K R Cut-Off
V . Position HDBF_95K G Cut-Off
V . Size VDBF_50Hz BCu-off [255
Sidepin VDBF_150
PinBalance b55] Rotation
Keystone Rotation
Parallel 2255] Rotation |__ Get Data |
TopComer 255) Rotation Get 9300 2
BomCorner 255) Rotation * | Get 6500 | |
TopBalance 255) Rotation nearer |
BomBalance 255] ail |
H_ Moire G1V_Fine | _Save Geometry |
V_Moire 255] Contrast
H_Focus R55] Brightness
Raster R Drive
Hliner p55] G Drive
FocusPhase 255
L
an 8
€
ViewSonic
Corporation
yan
as
os