ViewSonic E95 - Page 62

2. Command define.
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.6
2.7
Loading initial data file : File -> Open -> select file -> open
Write initial data to monitor : Monitor -> write_eep .
Get data
Get 9300
Get 6500
Get 5000
Save color
Save geometry
Save parameter
3. Fixture Connect.
Pattern
Generator
: Read E7PROM data (one mode adjustment value).
: get color 9300K to adjust .
: get color 6500K to adjust ..
: get color 5000K to adjust .
: save current color temperature data .
: Save geometry adjustment data.
: Save adjustment data to E7PROM.
Input :
H/V SYNC
Output : Video
H/V SYNC Initial data
ViewSonic
Corporation
Signal cable
Adjustment
Read E” PROM data
form monitor
Initial data /
Adjust data
Write to monitor
v
RS232
59
bid
edhe
vate
Sta
teas
obese