7
3.2 Playback Control
Work Mode
This is used to set the Multimedia Digital Poster to Stand-alone or LAN mode.
Stand-alone: Storage Priority, Playback Mode and Play Time functions will
enable.
LAN: Network settings will enable.
Note: When Work Mode has changed, please select Save and Reboot rst.
Storage Priority
This is used to set the Multimedia Digital Poster to read media les from Internal
Storage or USB Disk. There are two options as pictured below:
Internal Storage: The Multimedia Digital Poster reads media les from internal
storage only.
USB Disk: The Multimedia Digital Poster reads media les from USB disk only.
To Next Page
Loading...
Need help?
General
