E
N
G
L
I
S
H
ViewSonic GS815 9
Main Menu Controls
The menu items shown below can be adjusted by using the up
▲ and down ▼
buttons.
H. CONVERGENCE (Horizontal Convergence) adjusts
vertical color alignment. Use this control when red or blue
borders are present around the vertical segments of black
letters on a white background.
V. CONVERGENCE (Vertical Convergence) adjusts
horizontal color alignment. Use this control when red or
blue borders are present around the horizontal segments of
black letters on a white background.
V. LINEARITY- CEN (Vertical Linearity Center) adjusts
the vertical distortion at the center of the screen image.
Note: V. Linearity is an advanced control to used for setup
and calibration only.
V. LINEARITY- SYM (Vertical Linearity Symmetry)
minimizes the distortion (squeezing or stretching) of
geometric shapes between the top and bottom of the screen
image).
Note: V. Linearity is an advanced control to used for setup
and calibration only.
HOOKING - TOP adjusts the top corners of the screen
image.
HOOKING - BOTTOM adjusts the bottom corners of the
screen image.
GS815.book Page 9 Wednesday, September 13, 2000 2:49 PM
To Next Page
Loading...
