ViewSonic ID2456 - Page 39

39
Manual Image Adjust Menu
1. Press the 2/3/4/5 key to display the Quick Menu. Then press the 4 key to display
the OSD Menu.
2. Press the 1(ViewMode) or 2 key to select Manual Image Adjust. Then press the 3
key to enter the Manual Image Adjust menu.
1920 X 1080 @ 60Hz
Setup Menu
Color Adjust ViewMode
Manual Image
Adjust
Input
Select
Audio Adjust
Auto Image Adjust
Horizontal Size
H./V. Position
Fine Tune
Sharpness
Advanced DCR
Response Time
Aspect Ratio
Overscan
Low Input Lag
Blue Light Filter
ID2456
3. Press the 1(ViewMode) or 23 key
to enter its sub-menu.
4. Press the 1(ViewMode) or 23 key

Menu Opon Descripon
Auto Image Adjust 
Horizontal Size Stretch or shorten the screen on its horizontal axis.
 
Fine Tune Improve distorted image quality from an analog signal.
Sharpness Adjust the picture quality.
Advanced DCR

controls the backlight brightness and color to improve on
the ability to make the black blacker in a dark scene, and
make the white whiter in a bright environment.
Response Time


 
Overscan

