To Next PageTo Next PageHow to improve poor picture quality on ViewSonic Monitor?
To improve a poor picture on your ViewSonic Monitor, adjust chroma, brightness, and contrast settings in the menu. Also, check the signal cable.
Why is sound only coming from one speaker on my ViewSonic IFP8650 Monitor?
If sound is only coming from one speaker on your ViewSonic Monitor, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
Why is the remote control not working on my ViewSonic IFP8650 Monitor?
If the remote control for your ViewSonic Monitor is not working, check whether something is obstructing the display’s remote control receiver. Also, verify that the batteries in the remote control are installed correctly, and replace them if needed.
Why is there only one speaker working on my ViewSonic IFP8650 Monitor?
If only one speaker is working on your ViewSonic Monitor, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
How to resolve false color on ViewSonic IFP8650 Monitor?
To resolve false color issues on your ViewSonic Monitor, check the VGA connection. Also, adjust chroma, brightness, and contrast settings.
What to do if ViewSonic Monitor remote control is out of order?
If the remote control for your ViewSonic Monitor is not working, check whether something is obstructing the display’s remote control receiver. Also, check whether the batteries in the remote control are installed correctly and whether the batteries need to be replaced.
What to do if my ViewSonic IFP8650 shows unsupported format?
To resolve an unsupported format issue on your ViewSonic Monitor, choose auto adjust. If that doesn't work, adjust clock and phase settings.
Why is the picture trembling on my ViewSonic Monitor?
If the picture on your ViewSonic Monitor is trembling, check the signal cable. Also, check if other electronics are interrupting the signal.
What to do if the touch function does not work on ViewSonic IFP8650 Monitor?
If the touch function is not working on your ViewSonic Monitor, check that the drivers are installed correctly. If not, reinstall the driver. Also, check the setup and align it. Finally, check whether the touch pen is working properly.
Why does my ViewSonic IFP8650 Monitor turn off unexpectedly?
If your ViewSonic Monitor turns off unexpectedly, check whether Sleep mode is enabled. Also, check if there is a power outage in your area. You can also turn on the display and see if the problem is with the signal and control system.
General| Panel life | 30000 h |
|---|---|
| Pixel pitch | - mm |
| Response time | 8 ms |
| Display diagonal | 86 \ |
| Touch technology | Multi-touch |
| Display brightness | 350 cd/m² |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| LED backlighting type | Direct-LED |
| Touchscreen technology | Infrared |
| Contrast ratio (typical) | 1200:1 |
| Display number of colors | 1.073 billion colors |
| Active display area (W x H) | 1895.04 x 1065.96 mm |
| Number of simultaneous touchpoints | 20 |
| DVI port | - |
| USB version | 2.0/3.2 Gen 1 (3.1 Gen 1) |
| USB ports quantity | 6 |
| HDMI ports quantity | 4 |
| VGA (D-Sub) input ports | 1 |
| RMS rated power | 32 W |
| Number of built-in speakers | 2 |
| Internal memory | 2 GB |
| Processor model | A53 |
| Processor family | ARM Cortex |
| Processor frequency | 1.2 GHz |
| Internal storage capacity | 16 GB |
| AC input voltage | 100 - 240 V |
| Power consumption (standby) | - W |
| Power consumption (typical) | 500 W |
| Product color | Black |
| Product design | Digital signage flat panel |
| Panel mounting interface | 800 x 600 mm |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package weight | 105000 g |
| Certification | FCC, CE, cTUVus, RCM, PSB, EAC, CCC |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 1988 mm |
| Height | 1186 mm |
| Weight | 78000 g |
Statement regarding the device's compliance with FCC Rules, including operation conditions and interference.
Statement for compliance with Industry Canada regulations, including IC identifiers.
Statement of device conformity with EU directives, including WEEE information.
Declaration of product compliance with RoHS2 Directive and maximum concentration values for hazardous substances.
Description of the buttons and functions on the device's control panel.
Detailed explanation of the various input/output ports and their functions.
Explanation of each button on the remote control and its corresponding function.
Instructions on how to properly insert batteries into the remote control.
Guide on connecting external devices like Chromeboxes via VGA or HDMI cables.
Instructions for connecting the display to a computer using an RS232 serial port cable.
Guidance on connecting various USB devices, networking cables, and microphones.
Description of the vLauncher feature for customizing the welcome screen and default apps.
Overview of RS232 interface specifications and communication protocols.
Details of Set-Function and Get-Function commands for controlling the display remotely.
Terms and conditions of the limited warranty covering material and workmanship defects.
