Why is sound only coming from one speaker on my ViewSonic IFP6532-2 Monitor?
If you're only getting sound from one speaker on your ViewSonic Monitor, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
Why does my ViewSonic Monitor turn off unexpectedly?
If your ViewSonic Monitor suddenly turns off, check whether Sleep mode is enabled. Also, check if there is a power outage in your area. Then, turn on the display and see if the problem is with the signal and control system.
How do I fix a 'No PC signal' error on my ViewSonic IFP6532-2 Monitor?
If your ViewSonic Monitor displays 'No PC signal', check the display settings and the display resolution. You may also need to adjust the Hs & Vs (synchronization) settings using the OSD menu.
How to resolve a 'No PC signal' error on a ViewSonic IFP6532-2?
If your ViewSonic Monitor displays 'No PC signal', check the display settings and the display resolution. You might also need to adjust the Hs & Vs (synchronization) settings using the OSD menu.
How to improve poor picture quality on ViewSonic IFP6532-2?
If your ViewSonic Monitor displays a poor picture, try adjusting the chroma, brightness, and contrast settings in the menu. Also, check the signal cable.
How do I fix false colors on my ViewSonic Monitor?
If your ViewSonic Monitor is showing false colors, check the VGA connection. If the connection is fine, adjust the chroma, brightness, and contrast settings.
How to fix sound coming from only one speaker on a ViewSonic IFP6532-2 Monitor?
If your ViewSonic Monitor only outputs sound from one speaker, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
How to get rid of background streaking on my ViewSonic IFP6532-2 Monitor?
If your ViewSonic Monitor is showing background streaking, choose auto adjust. If the issue persists, adjust the clock and phase settings.
How to troubleshoot no sound on ViewSonic Monitor?
If you are not getting any sound from your ViewSonic Monitor, first press the Mute/Unmute button. If that doesn't work, adjust the volume. Finally, check the audio cable.
What to do if the touch function isn't working on my ViewSonic Monitor?
If the touch function on your ViewSonic Monitor isn't working, check that the drivers are installed correctly, and reinstall them if necessary. Also, check the setup and align it and make sure the touch pen is working properly.
General| Screen Size | 65 inches |
|---|---|
| Type | Interactive Flat Panel |
| Resolution | 3840 x 2160 (4K UHD) |
| Panel Type | IPS |
| Touch Technology | Infrared |
| Contrast Ratio | 1200:1 |
| Response Time | 8 ms |
| Refresh Rate | 60 Hz |
| Connectivity | Wi-Fi, Bluetooth |
| VESA Mount | 400 x 400 mm |
| Touch Points | 20 Points |
| Brightness | 350 cd/m² |
| Viewing Angle | 178° horizontal / 178° vertical |
| Ports | HDMI, USB, Audio |
| Operating System | Android |
To Next Page
