ViewSonic IFP6532-2 - Share; Samba

5353
Share
SAMBA
The SAMBA Service provides le sharing via LAN. When the SAMBA Service is
enabled, the user can explore the ViewBoard le system with a PC or mobile
equipment.
1. To access, go to: Sengs > Share > SAMBA.
2. Tap the toggle buon to enable the SAMBA Service, then set a password if
needed.
3. Ensure the ViewBoard and client equipment are connected to the same network.
4. Log in to the ViewBoard with the client equipment. Input the ViewBoard’s IP
address.