43
Startup channel: Click to change startup channel method.
Built-in PC startup option: Click to change built-in PC startup method.
Standby mode: Click to change standby mode.
Hibernate: To press power button or set power off to turn off IFP, IFP will turn off
all systems.
Sleep: To press power button or set power off to turn off IFP, IFP will turn off
backlight and system still running. If user wants to use LAN RS232 and HDMI
CEC function, the mode can support power on function.
How to enable sleep mode:
1. User needs to provide IFP S/N to ViewSonic. The S/N label is located near
I/O side.
2. ViewSonic will provide the KEY (FakePowerOff) file to user.
3. After getting the KEY file, copy the file to USB drive root.
4. Insert the USB drive to the USB port of IFP. (The KEY file MUST match
the IFP S/N).
5. Select Sleep.
Note: User does not need to restart the system.
If user sets the Standby Mode to Hibernate then set to Sleep again, user
needs to do step 3 to 5 again.
The KEY file must be paired with the specific S/N which is provided by
user as request.
Reminder: When Sleep mode is enabled, the system is still running on standby.
For energy-saving and product reliability assurance, please only
enable Sleep mode when it is necessary to do so.
To Next Page
Loading...
Need help?
General