ViewSonic LDS135-151 - Page 26

26
6. Two people will need to li the Back Cover of the ight case, aligning the Back
Cover with the posion of the lock-ups of the Boom Plate. When aligned, rotate
the ve (5) lock-ups clockwise to secure the connecon with the Boom Plate.
Next, li the Front Cover of the ight case onto the Boom Plate, aligning the
Front Cover with the posion of the lock-ups. When aligned, rotate the nine
(9) lock-ups clockwise to secure the connecon between the Front Cover, the
Boom Plate, and Back Cover. Ensure that the lock-ups are engaged in place, and
there are no obvious gaps.
7. Aer the ight case is closed, at least two people will be needed to move the
case to its storage or transport locaon. Ensure the brake locks are engaged on all
six rollers upon reaching the case’s storage or transport locaon.
When storing the ight case, ensure the ground is level and that all six rollers
are locked.