ViewSonic LS740HD - Connecting to Power; Connecting External Devices

1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
2. Ensure the screws used to attach the mount to the projector meet the following specifications:
▪ Screw type: M4 x 8
▪ Maximum Screw Length: 8 mm
CAUTION
▪ Avoid installing the projector near a heat source or air
conditioner.
▪ Keep at least a 10 cm (3.9 in.) gap between the ceiling
and the bottom of the projector.
Using the Security Bar
To help prevent the projector from being stolen, use a security slot locking device to secure the
projector to a fixed object.
Connecting to Power
LS740HD - ViewSonic Projectors https://manuals.viewsonic.com/LS740HD_Full_Guide
10 von 54 29.02.2024, 12:40