Menu Description
Display
Adjust Image, 3D, Aspect Ratio, Zoom,
and Keystone settings.
Audio Adjust the volume level or mute.
Setup
Adjust Projection, Power, Security,
Language, Input Source, etc. settings.
Information View projector information.
Menu Navigation
The projector has multilingual on-screen display menus that allow for image and settings
adjustment.
1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit button on the projector or
the remote control.
2. When the OSD is displayed, use the Navigation buttons to select any item in the main menu.
While making a selection on a particular page, press the Enter button on the projector or the
remote control to enter a sub-menu.
3. Use the Navigation buttons to select the desired item in the sub-menu and then press Enter
to view further settings. Adjust the settings by using the Navigation buttons.
4. Select the next item to be adjusted in the sub-menu and adjust as described above.
5. Press Enter to confirm, and the screen will return to the main menu.
6. To exit, press the Menu/Exit button again. The OSD menu will close and the projector will
automatically save the new settings.
LS740HD - ViewSonic Projectors https://manuals.viewsonic.com/LS740HD_Full_Guide
18 von 54 29.02.2024, 12:40
To Next Page
Loading...
