ViewSonic LS750WU - Correcting Keystone

37
Correcting Keystone
Keystoning refers to the situation where the projected image becomes a trapezoid
due to angled projection.
To correct this, besides adjusting the height of the projector, you may also:
1. Use the keystone keys on the projector or remote control to display the keystone
page.
2. Aer the keystone page is displayed, press to correct keystoning at the top of
the image. Press to correct keystoning at the boom of the image. Press to
correct keystoning at the right side of the image. Press to correct keystoning at
the le side of the image.
MENU
BLANK
EXIT
ENTER
COLOR
MODE