ViewSonic LS830 - Troubleshooting Common Issues; Resolving Power, Picture, and Image Problems; Remote Control and Image Alignment Troubleshooting

43
FUNCTION Description
2. Image menu
Advanced
Color
See “Adjusting Color” for details.
Tint
See “Adjusting Tint” for details.
Sharpness
See “Adjusting Sharpness” for details.
Gamma
See “Selecting a gamma setting” for details.
BrilliantColor
See “Adjusting Brilliant Color” for details.
Noise Reduction
See “Reducing image noise” for details.
Color Management
See “Color Management” for details.
Reset color settings Returns all color settings to the factory preset values.
3. Power Management menu
Auto Power On
Computer
Selecting Enable allows the projector to turn on
automatically once the VGA signal is fed through the
VGA cable.
CEC
See “Using the CEC function” for details.
Direct power on
Selecting On allows the projector to turn on
automatically once the power is fed through the power
cord.
Smart Energy
Auto Power Off
See “Setting Auto Power Off” for details.
Sleep Timer
See “Setting Sleep Timer” for details.
Power Saving
See “Setting Power Saving” for details.
MHL Settings
Please check your MHL dongle and Power Output of
OSD settings before used.
If you’d like to have power charging through additional
USB-type A, make sure to switch the Power Output
from MHL to USB-type A.
MHL Reset
Selecting Reset to reapply power after a power outage.