ViewSonic LS920WU - Page 44

44
Menu Option Description
Position
Adjust the position of the projected image.
NOTE:
• This funcon is only available when a PC input signal is
selected.
• The adjustment range may vary under dierent mings.
Phase
Adjusts the clock phase to reduce image distortion.
NOTE: This funcon is only available when a PC input signal is
selected.
H. Size
Adjusts the horizontal width of the image.
NOTE: This funcon is only available when a PC input signal is
selected.
Zoom
Magnifies the projected image and allows you to navigate the
image.
Digital Lens Shift
You can adjust the vertical lens shift by +/- 50% or horizontal
lens shift by +/-50%, which offers the convenience of not
needing to physically move or interact with the projector.
NOTE: This funcon is only available when the image is zoomed
out.
OverScan
Adjusts the overscan rate from 0% to 5%.
NOTE: This funcon is only available when a Composite Video or
HDMI input signal is selected.