ViewSonic LX700-4K - Page 42

42
Menu Descripon
Ultra Fast Input
This funcon is favorable to frame rate reducing. Quick
response me in nave ming can be achieved. When
enabled, the following sengs (if applicable) will return to
factory preset values and disabled: Warping, Keystone, Four
corners., Aspect Rao, Zoom.
NOTE: This funcon is only available when a 4K@60Hz,
1440P@60/120Hz and 1080P@60/120/240Hz
input signal is selected. If you want to adjust
Warping, Keystone, Four corners, Aspect Rao, or
Zoom, please disable Ultra Fast input.
3D
3D Mode
Enable or disable the 3D funcon.
3D Format
Select the 3D content format.
NOTE: A Blu-ray 3D source will be detected
automacally, and opons will not be selectable.
Opon Descripon
Auto
When a 3D idencaon signal is
detected, the 3D format is selected
automacally.
SBS Display in Side-by-Side format.
Top and Boom Display in Top and Boom format.
Frame Sequenal Display in Frame Sequenal format.
3D Sync Invert
Enable or disable the 3D Sync Invert funcon.
NOTE: This projector is a 3D ready projector with DLP-Link 3D soluon. Please
make sure your 3D glasses are for DLP-Link 3D. This projector supports
frame sequenal (page-ip) 3D via the HDMI 1/HDMI 2 ports. For the
best performance, 1920 x 1080 resoluon is recommended. Please note
that 4K (3840 x 2160) resoluon is not supported in 3D mode.